The interflow of the soil is eased, thus the fuel consumption of the tractor is reduced.

• There are no problems regarding the spring break and creep.
• By attaching the chisel tip it can carry out the duty of chisel.
• By attaching an stubble hoe, it can carry out the task of a plow.
• The wrist height is higher, thus it can plough the field deeper.
• The front and rear foot distance is greater.
• The width between the two feet side by side has been increased.
• With this increase in the distance, the aim was to make the interflow of the soil much more comfortable, especially during the spring plough where moisture is increased.
• After the harvest there is usually no rain, but still the soil needs to be made ready for the cultivation pro- cess until the planting time. In such cases, where the soil is not ready, the narrow anchors (stubble anchor) are fitted and with the stubble anchor a better stubble ploughing can be carried out which is much better than the plow. By attaching (duplexing plows) it can be used for duplexing purposes.
• (Also these cultivators can be used as chisel by attaching chisel tips). Our cultivators can be combined with toothed harrow or toothed, palletized rotary har- row (cylinder) or can be combined with both.
• The duplexing plows which are working under heavy conditions made from wear-resistant quality steel product.
• The cultivator compression springs are composed of two ø20 and ø12 mm nested spring steel. The mounting fasteners on the chassis group are entirely manufactured from quality steel St 52.