1. It picks the pumpkins automatically without requiring human power.
2. The seeds of the pumpkins broken up in the crusher are separated in the Batur reservoir.
3. Capacity is increased thanks to the Batur reservoir, which is increased by 2900 mm in length.
4. The seeds cleaned in the 1st and 2nd cleaning tambour are transferred to the grain container.
5. The seeds coming from the grain container are conveyed in the hose by the help of pressured air to the storage
6. The wetness of the seed and the 20% of the moisture are expelled by the compressed air from the perforated sheet on the storage.
7. In this way, the seed comes out much cleaner and drying times of the grains are reduced by 40%.
8. Thanks to its 400 rows of 8 pins on the cylinder, it also has the ability to pick small pumpkins.
9. The pins on the cylinder are of the feature of a bolt-on attachment and extension and shortening.
10. Thanks to the weed cleaning brush unit mounted on the cylinder, it prevents some of the weeds that come with the pumpkin from getting into the machine.
11. The 1st and 2nd cleaning tambours (sieve plates) are mounted on the machine with un-welded bolts. The required sieve sheet can be easily removed and installed on this way.
12. The capacity of the machine has been increased thanks to the Batur chamber which is enlarged in circle size.

The issues to cared be about

1. Pumpkins that are removed from their stems and placed in the row are waited for 8-10 days.
2. Waiting time should not be too high or low.
3. Pumpkin rows must be equal to each other.
4. If the field in which the pumpkin is planted is barren and pumpkins are small, it is necessary to combine several rows as the capacity of the machine is high.
5. Weeds and stones should be cleaned from the pumpkin rows.
6. The machine should be washed with plenty of water every day, the Batur wire spaces and spirals must be cleaned by removing upper and side covers.
7. The lubrication should be done immediately after the machine is washed.
8. During the first run, sunflower oil is poured over the sieve sheets and the movement of the shaft is gradually given.
9. In subsequent runs they are first soaked with water.
10. The machine lubricates itself with the pumpkin while it is running. For this reason the machine should not be operated idle when there is no pumpkin.
11. The grain container must be cleaned frequently.
12. Chains, gears, balls and bearings in the machine are often lubricated and chain and belt tension must be checked.
13. Care should be taken not to allow weeds and stones to enter the machine.
14. No oil must contact to the belts on the machine.